Also known as: in the UAE the Leopard 5, 7 and 8 are sold as the Denza B5, Denza B8 and Fang Cheng Bao Ti7 (Bao 5, Bao 8 and Tai 7 in China). Everything in this guide applies to all of them.
Quick answer: Installing a Leopard Perfume cartridge takes under a minute. Locate the magnetic dock beneath the centre console, remove any old cartridge, wipe the contacts with a dry cloth, unseal the new cartridge, and lower it into the slot — the magnet pulls it in and it clicks into place. Confirm the new scent on the AC touchscreen and set your intensity. That’s it. Below is the full walkthrough, plus the small things that make the difference between “installed” and “installed correctly.”
Before You Start
You’ll need just the sealed cartridge and a dry microfibre cloth. Don’t use any liquid cleaner near the dock — the magnetic contact doubles as a sensor, and liquids can damage it. If you’re refilling rather than installing for the first time, have your new cartridge ready before you pull the old one so the dock isn’t left open. For the full picture of how the system works, see our complete Leopard car perfume guide.
Step-by-Step Installation
- Locate the magnetic dock. It sits beneath the centre console, visible from the front passenger seat — three slots, side by side.
- Remove the previous cartridge (if any). Pull it gently straight up. The magnet releases with a soft click.
- Wipe the dock contacts. Use a dry microfibre cloth. No liquid cleaner — it can damage the sensor.
- Unseal the new cartridge. Break the foil seal on the carton. The glass-ceramic bottle has a magnetic base.
- Lower the cartridge into the slot. The magnet draws it in from about 5–8mm away. A correctly seated cartridge clicks and won’t rotate.
- Confirm on the AC menu. Open the air-conditioning settings on the touchscreen; the fragrance system should now display the newly installed scent. If it doesn’t, remove and reseat the cartridge.
- Set the intensity. Default is level 2 (medium). In UAE summer, drop to level 1 to slow diffusion and extend cartridge life.
How to Tell It’s Seated Correctly
Two quick checks: the cartridge should click when it meets the dock, and it should not rotate when seated. If it spins freely or feels loose, pull it out, wipe both magnetic contacts with the dry cloth, and reseat it. A genuine cartridge in a healthy dock locks firmly every time — if it won’t, see the troubleshooting note below.
When Will You Smell It?
Diffusion is passive and scales with your air-conditioning fan speed, so the scent comes through within about 30 seconds of starting the car with the AC on. It’s strongest on start-up (AC at full) and gentler at idle. A brand-new cartridge opens with a bright top note that settles into its heart and base over the first few minutes — that layered progression is the sign of a genuine cartridge.
A Note on First-Time Owners
Every Leopard delivery includes a welcome kit with three sealed cartridges. When those run out — usually around 90 days — you refill from autosupp.com. The installation steps are identical whether it’s your first cartridge or your fifth, and identical across the Leopard 5, 7, and 8, since the dock is the same in all three. To learn when a cartridge needs replacing, see our when-to-refill guide.
If Installation Doesn’t Go Smoothly
- No scent after 60 seconds with AC on full? Reseat the cartridge; if still nothing, the dock sensor may need an Al-Futtaim service check.
- Cartridge rotates in the slot? It isn’t seated. Wipe both contacts and reseat.
- Visible residue on the dock? Stop, wipe with a dry cloth, and don’t install over residue — see our troubleshooting guide.
Where to Buy Genuine Cartridges
autosupp.com is the UAE’s only authorized Leopard Perfume retailer. Choose your scent — Wind, Woody, Rain, Fruit, Green — or try all five with the Discovery Gift Set. Free UAE shipping, replacement guarantee on every cartridge.
Frequently Asked Questions
Q: How do I install a Leopard Perfume cartridge? A: Locate the magnetic dock beneath the centre console, remove any old cartridge, wipe the contacts with a dry cloth, unseal the new cartridge, and lower it into the slot until it clicks. Confirm the scent on the AC touchscreen and set your intensity.
Q: Which way does the cartridge go in? A: The magnetic base goes down into the slot. The magnet pulls it into the correct orientation from about 5–8mm away and it clicks into place; a correctly seated cartridge won’t rotate.
Q: How long until I can smell the fragrance? A: About 30 seconds after starting the car with the AC on. Diffusion scales with fan speed, so it’s strongest on start-up.
Q: Do I need any tools or cleaner? A: Only a dry microfibre cloth to wipe the contacts. Never use liquid cleaner near the dock — it can damage the sensor.
Q: Is installation the same on Leopard 5, 7, and 8? A: Yes — the magnetic dock and cartridges are identical across all three models, so the steps are the same.
Q: The screen doesn’t show the new scent. What do I do? A: Remove and reseat the cartridge, making sure it clicks and doesn’t rotate. If the AC menu still doesn’t detect it, the dock sensor may need an Al-Futtaim service check.
The Bottom Line
Installing a Leopard cartridge is a 60-second job: dock, seat, confirm, set intensity. Do the small things right — dry contacts, a firm click, intensity dialled for the season — and the cabin smells exactly as intended. Need a fresh cartridge? Reorder your scent or grab the Discovery Gift Set. Free UAE shipping, replacement guarantee on every cartridge.
Series: Leopard Owner Guides